Download Apk apps

and Games

The Best 802.11g Routers to Buy in 2018 For Affordable Networking

[ad_1]

The 802.11g standard precedes the 802.11n and the latest 802.11ac standards. While the latest wireless standards are backward compatible, you might want to still look at a few 802.11g offerings, especially if your needs are low or you don’t have a fast enough ISP connection. There aren’t many devices with 802.11g available today but if you are still using a wireless card from about 5 or 6 years ago, this article should help you get an idea of the best 802.11g routers you can buy.

Devices that support 802.11g can connect over the 2.4 GHz wireless frequency band. This band allows for a much higher range but also has lower bandwidth than what is possible with the 5 GHz frequency. While 802.11n can work over both 2.4 and 5 GHz, 802.11g can work only over the 2.4 GHz band. That is why many of the 802.11g routers are single-band routers. 802.11g routers are backward-compatible with the older 802.11a and 802.11b standards.

For this article, several factors were considered for narrowing down the best 802.11g router options available in 2018. While most of the routers support only the 802.11g standard, we included a few 802.11n models as well considering the price and speeds on offer. 802.11n routers are fully backward-compatible with 802.11a/b/g devices so our suggestion would be to go for the more recent standard whenever possible. We have also considered the maximum coverage offered, connectivity options, software UI etc along with the popularity of these routers in the market. So, here are the 7 best 802.11g routers available today.

1. Linksys WRT54GL

Offer


Linksys WRT54GL

  • Features: Single-band (2.4); Built-in firewall; Linux-based
  • Wireless Protocols: 802.11g
  • Data Transfer Rate: 54 Mbps
  • No. of Ethernet / USB Ports: 4 / 0
  • Dimensions: 24.8 x 25.4 x 7.1 cm
  • Weight: 1.65 lb

For those looking at a basic wireless setup, the Linksys WRT54GL is hard to beat. This one of the best 802.11g routers you can find and it offers a maximum throughput of 54 Mbps. It does not offer USB connectivity but you still get 4 10/100 Ethernet ports for wired connectivity. In this day and age, the overall speed might seem low but this router does the job if you are already handicapped by your ISP’s plans and you are only looking at a simple wireless option.

Like many Linksys routers, the WRT54GL is custom firmware compatible thanks to its support for Linux-based open source firmware. However, we must say that the 802.11g is now succeeded by higher standards such as 802.11n and 802.11ac so unless you’re really strapped for cash, we’d suggest you look for a router that at least offers the 802.11n standard at a minimum.

  • Pros: Very economical; Open-source ready
  • Cons: Only supports 802.11g

2. NETGEAR WG602


NETGEAR WG602

  • Features: Single-band (2.4); Easy setup; Removable antenna
  • Wireless Protocols: 802.11g
  • Data Transfer Rate: 54 Mbps
  • No. of Ethernet / USB Ports: 0 / 0
  • Dimensions: 10.75 x 10 x 4.25 in
  • Weight: 3 lb

The NETGEAR WG602 offers a good option for those looking at a capable 802.11g router. The design is very minimal and the device is built only for providing a wireless access point to your LAN and nothing else. Therefore, there are no Ethernet or USB ports apart from the obvious WAN port for plugging in your connection. The included CD provides step-by-step instructions for setting up the router and the web interface can be easily updated via software.

The WG602 offers both WEP and WPA2 password protection and you can also configure the software to allow only specific MAC addresses to access the network. An added advantage is that this router can also be configured to act as a bridge or repeater. Performance is what you’d expect from a router at this price and it doesn’t disappoint as long as you are comfortable with the fairly basic user interface.

  • Pros: Simple and easy to set up; Can work as a bridge or repeater
  • Cons: No additional USB/Ethernet ports; Only a single antenna

3. NETGEAR WG302 ProSafe


NETGEAR WG302 ProSafe

  • Features: Single-band (2.4); AutoCell RF management; WPA2 support; 2 antennas; Bridge and Repeater modes
  • Wireless Protocols: 802.11g
  • Data Transfer Rate: 54 Mbps
  • No. of Ethernet / USB Ports: 0 / 0
  • Dimensions: 12.2 x 10 x 4.5 in
  • Weight: 3.9 lb

The NETGEAR WG302 ProSafe is one the best secure routers available among those that support the 802.11g standard. The WG302 is built for both home and office use and is backward compatible with devices that support the older 802.11b and 802.11a standards. It offers a maximum speed up to 54 Mbps but that can be increased up to 108 Mbps when paired with a client adapter that also works on 802.11g. Support for WEP and WPA2 is available along with MAC address filtering. It comes with two 5 dBi antennas for enough coverage in a small to the medium-sized apartment.

The WG302 is a good option for those who are security conscious but just make to update the device to the latest firmware. And since it uses the 2.4 GHz band, make sure there is no interference from other equipment such as wireless peripherals or even microwave ovens. The documentation is not the best there is so you might need to visit a few forums for troubleshooting any issues.

  • Pros: Good range; Can double throughput when paired with a client adapter; Good focus on security
  • Cons: Needs proper attention during setup; Documentation not very thorough

4. EnGenius ECB3500


EnGenius ECB3500

  • Features: Single-band (2.4); 600mW power; 7 operating modes; 2 antennas
  • Wireless Protocols: 802.11g
  • Data Transfer Rate: 54 Mbps
  • No. of Ethernet / USB Ports: 0 / 0
  • Dimensions: 12.1 x 9.2 x 3.1 in
  • Weight: 2.03 lbs

If you’re on the lookout for a versatile 802.11g router that does it all, the EnGenius ECB3500 should be high on your list. The router offers 2 antennas that can broadcast the signal with up to 600mW power. This ensures you get good coverage even at long distances. The ECB3500 can operate in 7 different modes including access point, client bridge, repeater, access point router, client router, or any other WDS solution. So whether you’re looking to add wireless capabilities to your network or need an additional repeater for extending coverage, the ECB3500 has you covered.

The device is easy to set up and configure but you might have to change the admin IP address as it may conflict with other connected devices. The instructions are a bit unclear but a quick internet search should point you to the relevant information. The ECB3500 already offers great range but you if you wish, you can also extend the coverage by replacing the default antennas with even more powerful ones.

  • Pros: Excellent range; Can work as any WDS solution; Easy setup
  • Cons: Default UI can be a bit difficult to configure

5. TP-Link N450

Offer


TP-Link N450

  • Features: Single-band (2.4); Easy Setup; 10/100 Ethernet; 3 antennas; client bandwidth control; IP-based QoS; Parental controls
  • Wireless Protocols: 802.11g/n
  • Data Transfer Rate: 450 Mbps
  • No. of Ethernet / USB Ports: 4 / 0
  • Dimensions: 5.5 x 7.9 x 1.1 in
  • Weight: 0.66 lb

Despite lacking a few features such as USB file sharing, the TP-Link N450 is one of the best wireless routers you can get under $50. The N450 can support up to 802.11n and existing 802.11g devices will work with this router without any issues. The router is easy to setup and the included software can automatically detect most common network settings thus, minimizing the hassle of dialing your ISP for knowing them. There are only two antennas provided but they are powerful enough to provide enough coverage for a small apartment.

The TP-Link N450 offers an easy wizard-based software setup. It is recommended that you follow this method for setting up the router as manually configuring the settings can get a bit cumbersome for some. This router can also be used as a range extender by simply copying over the SSID and the password of the network you want to extend.

  • Pros: Easy setup; Affordable; Can be used as a range extender
  • Cons: No USB sharing available; Manual configuration can get a bit tedious

6. ASUS RT-N12

Offer


ASUS RT-N12

  • Features: Single-band (2.4); Router/AP/Range Extender; Support for up to 4 SSIDs; 2 antennas
  • Wireless Protocols: 802.11g/n
  • Data Transfer Rate: 300 Mbps
  • No. of Ethernet / USB Ports: 4 / 0
  • Dimensions: 11.1 x 7.7 x 3.1 in
  • Weight: 1.37 lb

The ASUS Wireless RT-N12 is one of the best routers under $50 and it offers a great bang for the buck. It supports all wireless standards up to 802.11n and is backward-compatible with 802.11g devices as well. Since it supports only a single band you get a theoretical peak speed of about 300 Mbps. If your ISP speeds are close to this mark, then you should not be facing any issues for VoIP calls, streaming 4K video to a single client, or just for surfing the internet from this device. A good aspect of the ASUS Wireless RT-N12 is that it can also function as a router, access point, or a range extender.

The RT-N12’s performance and reliability are excellent and setting it up are very easy. Those interested can also flash custom DD-WRT firmware for unlocking additional functionality. However, the stock firmware should be more than adequate for most purposes. If you are experiencing slower speeds than expected, try increasing the bandwidth of a particular channel to see if that helps.

  • Pros: Good range and speeds; Built-in firmware is feature-rich
  • Cons: None as such

7. D-Link DIR-605L


D-Link DIR-605L

  • Features: Single-band (2.4); Easy setup; Remote network monitoring; Mydlink service
  • Wireless Protocols: 802.11g/n
  • Data Transfer Rate: 300 Mbps
  • No. of Ethernet / USB Ports: 4 / 0
  • Dimensions: 5.9 x 5 x 1 in
  • Weight: 0.5 lb

The D-Link DIR-605L makes for a cheap and affordable option for those who don’t want to indulge too much in a wireless router but still would like to get a bit more speed than conventional 802.11g routers. The DIR-605L also supports 802.11n and is, therefore, fully backward compatible with existing 802.11g devices. The router offers speeds up to 300 Mbps and its two external antennas can offer a good range. The Mydlink service makes administering the router easy from a smartphone.

The performance of this router is very good and there have no major issues reported so far. Just make sure to update the firmware as soon as you install it to resolve any minor issues. Also, make sure to disable all filter settings and auto-bandwidth allocation settings to maximize the speed.

  • Pros: Supports 802.11n; Good range; Feature-rich Mydlink app
  • Cons: Needs some tweaking to get rated speeds

Further Reading

We will continue to cover a great deal of information about routers at various price points and features. We hope this article would be of help in narrowing down the best 802.11g routers available today. That said, if you are looking at a more future-proof wireless solution, check out some other articles in this series below.

  1. The Best 802.11ac Routers of 2018
  2. The Best 802.11n Routers of 2018

Final Thoughts

Dear readers, that was our comparison of the best 802.11g routers to consider buying in 2018. Let us know if you have additional questions in the comments below. We will do our best to provide a timely response.

Please share this article online and don’t forget to follow TechNadu on Facebook and Twitter for instant updates.

The post The Best 802.11g Routers to Buy in 2018 For Affordable Networking appeared first on TechNadu.



[ad_2]
Source link

Updated: —

Leave a Reply

Your email address will not be published. Required fields are marked *

Apk apps and Games; 2018